Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Yosemite Lakes
Roof replacement in Yosemite Lakes, CA typically runs between $14,800 and $38,000 for a full tear-off and Class A assembly, with most homes landing in the $18,000-$26,000 range depending on pitch, decking condition, and the framing surprises hiding under original wood shake. The work usually takes 3 to 7 days once we open the roof and verify what’s beneath. If you’re holding an insurer’s non-renewal notice or the county has flagged your WUI compliance, call (945) 303-9821 and we’ll walk you through exactly what your roof needs to pass.
We work throughout Yosemite Lakes Park, from the steep A-frame lots along Yosemite Springs Parkway to the ranch-style streets near Revis Road and the manufactured-home parcels off Patrick Avenue. Our crews know what 40-to-50-year-old foothill roofs hide once the shake comes off, and we price the job in writing before a single nail is driven.
Why Tilehurst Roofing Is Yosemite Lakes’s Preferred Roof Replacement Company
Tilehurst Roofing is a Kingswell family roofing company, founded in 2000, and our Yosemite Lakes customers call us for one reason more than any other: we answer the phone. A live person picks up 24 hours a day, 7 days a week. No voicemail tree, no “we’ll call you back Monday.” When an insurer’s cancellation letter lands on a Friday afternoon, you reach a human.
We put the full price in writing before any work starts, and that number doesn’t move at the door. Our technicians are background-checked and uniformed, so you know exactly who’s on your roof and when they’ll arrive. And every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right for a full year after the job, documented in writing before the crew leaves. That’s The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
Roof Installation in Yosemite Lakes
Roof installation in Yosemite Lakes almost always means a full tear-off and re-deck, because the original wood shake from the planned-community builds of the late 1960s through 1980s can’t simply be covered over. The shake itself is usually past service life, the decking beneath has gaps and dry rot, and the assembly fails Madera County’s wildland-urban interface fire code requirements until it’s a documented Class A system. A straightforward tear-off and architectural shingle install on a 1,600-2,200 square foot foothill home runs $16,000-$27,000 here.
Tear-Off and Decking Replacement
Most Yosemite Lakes roofs need some decking replacement once the old material comes off. We inspect every plane and replace rotted or undersized sheathing at a per-sheet price that’s already written into your contract allowance, so there’s no surprise change order at the end.
Class A Assembly and WUI Compliance
For homes flagged by Madera County or cited by an insurer, we build the full fire-rated assembly: Class A underlayment, metal drip edge at all rakes and eaves, valley flashing, and the manufacturer’s rated starter and cap products. We document the assembly so you can send proof to your carrier the day we finish.
Roof Replacement Contractor in Yosemite Lakes
A roof replacement contractor in Yosemite Lakes has to understand that this isn’t a cosmetic job. The original shake roofs scattered through Yosemite Lakes Park don’t just look worn; they’re actively blocking insurance renewals under California’s post-2018 fire-zone underwriting restrictions. Homeowners here frequently begin the conversation with a cancellation notice in hand, not a leak. We quote a typical steep-pitch A-frame or ranch replacement at $18,000-$30,000, depending on decking damage and access.
Framing Repairs Before the Roof Goes Back On
Opening an older foothill roof regularly turns up rafter tails that were sistered with undersized lumber, rusted valley flashing, or sections where no ice and water shield was ever installed. We repair the framing first, document what we found, and only then lay the new assembly. Nothing gets covered until it’s right.
Insurance and County Compliance Paperwork
Once the roof is complete, we provide the documentation your carrier and Madera County need to close out the WUI flag. You get a written summary of materials, assembly ratings, and installation details. Most customers forward that directly to their agent and have the non-renewal reversed within a few weeks.
Trusted Brands We Service in Yosemite Lakes
We install and service roofing systems from GAF, Atlas, and Tamko, and we maintain full access to the complete manufacturer lineups, including architectural shingles rated for high-UV foothill exposure and Class A fire-rated assemblies. For Yosemite Lakes customers, the product spec matters twice: it has to withstand Sierra foothill heat and occasional snow load, and it has to satisfy a WUI inspector. We’ll walk you through the differences in granule density, wind rating, and fire classification before you choose, and we stock the common components locally so a replacement doesn’t stall waiting on a truck from the valley.
Common Roof Replacement Problems We See in Yosemite Lakes Homes
- Original wood shake failing Class A requirements. Shake that’s 40-50 years old in a High Fire Hazard Severity Zone isn’t just worn out; it’s a documented compliance failure. Most of our Yosemite Lakes replacements start because the roof can’t pass a WUI inspection or the insurer won’t renew coverage.
- Hidden underlayment and flashing failure on steep pitches. The original builds went light on ice and water shield and valley flashing. A wet foothill winter or a heavy snow-load event pushes water past the decking, and by the time the homeowner sees a stain, the sheathing is already compromised.
- UV-accelerated granule loss on older asphalt shingles. At 2,400-2,800 feet, the summer sun bakes shingles hard. Granules shed years early, exposing the mat, and the shingle’s rated service life never shows up. We see this constantly on the few Yosemite Lakes homes that were re-roofed in the 1990s with builder-grade asphalt.
- Undersized framing from the original construction. A-frames and ranch builds from this era weren’t always framed to carry a modern Class A assembly. When we tear off, we often find rafter tails sistered with undersized lumber or sagging ridge lines that need structural correction before the new roof can go down.
Pricing for Roof Replacement in Yosemite Lakes, CA
A full roof replacement in Yosemite Lakes runs roughly $14,800-$38,000. The spread comes down to three things: the pitch and size of the roof, how much decking needs to be replaced, and whether we find framing damage once the old material is off. A modest ranch on a gentle slope with a clean deck lands near $16,000-$20,000 with architectural shingles. A steep A-frame with decking rot and rafter repairs climbs toward $30,000 or beyond. Flat roofing on manufactured homes or low-slope additions runs $9-$14 per square foot installed depending on the membrane system. You’ll get a written line-item quote before any work begins, and any allowance for hidden decking is priced and approved in writing before we touch it. Call (945) 303-9821 to schedule your free estimate.
We Also Serve Cities Near Yosemite Lakes
Tilehurst Roofing crews run Roof Replacement work through the broader Central California foothills and valley. If you own property outside Roof Replacement in Yosemite Lakes, we also serve homeowners in Los Angeles, San Diego, San Jose, and San Francisco. The same written pricing and 365-Day Done Right Promise apply on every job, no matter which crew shows up.
Serving Yosemite Lakes, CA - Our Local Coverage Area
We’re based in the Yosemite Lakes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Yosemite Lakes
Yes, in most cases a documented Class A roof replacement resolves the non-renewal, but the key is the documentation. Your carrier needs proof of the assembly, not just a receipt. We provide a written summary of materials, fire ratings, and installation details the day we finish, and most Yosemite Lakes customers have their policy reinstated or re-shopped successfully within weeks. Call (945) 303-9821 and bring your cancellation letter; we’ll tell you exactly what your roof needs to satisfy the underwriter.
It has to come off. Re-covering over wood shake doesn’t create a Class A assembly, and Madera County’s WUI compliance requirements plus California fire-zone underwriting rules mean a covered-over shake roof still fails. The old shake is removed, the decking is inspected and repaired, and a full fire-rated assembly is installed from the deck up. That’s the only path that closes out the insurer’s flag.
Framing problems, mostly. We tore the original wood shake off an A-frame on Yosemite Springs Parkway and found three rafter tails sistered with undersized lumber, rusted-through valley flashing, and no ice and water shield anywhere along the eaves. After sistering the damaged framing and replacing the rotten fascia, we re-decked the plane, laid a Class A assembly with starter strip on the rake edges, and our tech chased two open penetrations the old shake had been hiding before the county signed off on the WUI upgrade. That’s typical, not unusual, and it’s why we write a decking allowance into every contract before we start.
Yes. The intense summer UV at 2,400-2,800 feet accelerates granule loss, and wet winters with occasional snow-load events punish any underlayment weakness, so we spec high-granule-density architectural shingles with a full ice-and-water shield at the eaves, valleys, and penetrations. The assembly also has to meet Class A fire rating for the High Fire Hazard Severity Zone, which rules out some lighter-weight products that would pass inspection in the valley. Your quote includes the specific product spec, not just a brand name.
Line them up by decking allowance, underlayment spec, and fire rating first. If one bid is $4,000 lower but doesn’t include ice and water shield, Class A underlayment, or a written decking allowance, it’s not actually lower; it’s just less specific. Both bids should state the shingle brand and model, the underlayment and fire classification, and exactly what happens when rotted sheathing is found. If the cheaper contractor won’t write that down before work begins, the difference will show up as a change order later. Call (945) 303-9821 and we’ll walk through your current bid with you, free, before you commit to anything.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Yosemite Lakes and the surrounding foothill communities.






Before
After
Before
After
Before
After