Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Owens Corning Roof Replacement in Los Angeles: What to Know First
Owens Corning roof replacement in Los Angeles typically runs $11,000 to $22,000 for a standard single-family home, with most jobs completed in 2 to 5 days once materials are on site. We’re an independent Owens Corning service provider, so we’re not tied to a single product line and we don’t have to push one shingle over another. What we do is replace Owens Corning roofs the right way: full teardown, honest decking inspection, and a written price in your hands before the first tile moves.
If you own a home with Owens Corning shingles and you’re seeing granule loss, curling, or leaks that keep coming back, this page tells you what’s actually happening up there and what a honest replacement should cost. Call (945) 303-9821 and you’ll get a live person, not a voicemail.
How Owens Corning Products Fail - and How We Fix Them
- Duration Series granule loss and premature balding. We see this most on homes in the San Fernando Valley and the flats, where sun exposure runs 300-plus days a year. Owens Corning Duration shingles have a heavy granule embed, but when installation wasn’t done with the right nail placement or the decking wasn’t prepped, the shingles can shed granules early. Once the asphalt is exposed, the shingle cooks from the inside. The fix is a full replacement, because you can’t re-embed granules once they’re gone.
- Oakridge series cracking at the nail line. This shows up on roofs that got nailed too high on the shingle, a common shortcut we find when we tear off older Owens Corning installs. The crack runs right along the nail line and water follows it into the decking. On a replacement job, we pull the whole roof, replace any soft decking, and install with the nail pattern Owens Corning actually specifies.
- Decking rot under older Owens Corning 3-tab roofs. L.A. doesn’t get rain nine months a year, but when it does, it comes hard. Older 3-tab Owens Corning shingles with worn sealant strips let water sit against the decking, and by the time the homeowner sees a ceiling stain, the plywood underneath is often gone. We don’t patch over rotten decking. We cut it out, replace it, and the price for that is in the estimate before we start.
- Hip and ridge cap failure on Duration installations. The hip and ridge caps take the most wind and sun on any Los Angeles roof, and when they’re installed with standard shingles instead of Owens Corning’s own ridge cap product, they fail years early. We replace hips and ridges with the proper cap shingles, not cut-up field shingles.
- Attic ventilation problems that shorten the life of any Owens Corning roof. This one’s less about the shingle and more about how the roof breathes. L.A. attics get brutally hot, and a roof with poor intake or exhaust ventilation will curl Owens Corning shingles long before their rated life. When we replace a roof, we check and, when needed, correct the ventilation so the new Owens Corning product actually lasts.
Our Owens Corning Roof Replacement Process
- 1
Call and talk to a person. You call (945) 303-9821, a live person answers, and we schedule a time that works. We show up in the window we gave you.
- 2
Full roof inspection, including the attic. Greg Holloway or one of our senior techs walks the roof and goes into the attic. We’re looking at decking, ventilation, flashing, and how the Owens Corning shingles have been wearing. You get photos and a plain-language explanation of what we found.
- 3
Written price before the first nail. We hand you a line-item estimate. It includes tear-off, decking replacement (if needed), underlayment, shingles, flashing, ridge cap, cleanup, and the permit. If the decking is fine, the price doesn’t change when we open the roof. We don’t do change orders on hidden surprises.
- 4
Tear-off and decking inspection. The old Owens Corning roof comes off down to the sheathing. If we find rot, we replace it at the per-sheet price already in your estimate. Then we lay new underlayment and install the new Owens Corning system.
- 5
Installation with the manufacturer’s nail pattern and our own quality checks. We follow Owens Corning’s installation specs and then add our own checks at the end of each day. Ridge caps, drip edge, valley flashing: every piece gets looked at twice.
- 6
Cleanup and the written guarantee. We magnet-sweep the yard for nails, haul everything away, and hand you a written guarantee before the crew leaves. Under the 365-Day Done Right Promise, if it isn’t done right, we make it right for a full year.
What Owens Corning Roof Replacement Costs in Los Angeles
Most Owens Corning roof replacements in Los Angeles land between $11,000 and $22,000, depending on roof size, pitch, decking condition, and which Owens Corning line you choose. Here’s the real breakdown:
- Owens Corning Oakridge architectural shingles: $11,000 to $16,000 for a typical 1,500 to 2,000 sq ft roof, full tear-off included.
- Owens Corning Duration architectural shingles: $13,000 to $18,500. The step up in price gets you a thicker shingle with better wind and impact ratings.
- Owens Corning Duration Designer (like the shake-look lines): $16,000 to $22,000, depending on style and roof complexity.
- Decking replacement: $90 to $120 per sheet when rot is found beneath the old roof.
What moves the price is decking condition, roof pitch (two-story and steep roofs cost more), and whether we need to correct ventilation. What doesn’t move it: our estimate is a fixed number, not a starting point. Call (945) 303-9821 and we’ll give you a written price for your specific roof. The estimate is free.
Why Los Angeles Homeowners Call Tilehurst Roofing for Owens Corning Work
We’re part of the Kingswell family of roofing companies, founded in 2000. That means we work the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. We don’t ask you to trust us on vibes.
Every job starts with a written price before any work starts, and every replacement carries the 365-Day Done Right Promise. We carry material options from seven manufacturers: Owens Corning, GAF, CertainTeed, IKO, Atlas, Tamko, and Boral. That means if Owens Corning isn’t the right product for your home after we look at it, we’ll tell you and show you the alternative, not just sell you what’s in the truck.
FAQs
Maybe, but not the way most people think. Owens Corning’s warranty covers material defects, not labor, and the coverage depends on the product line and the installation date. If your roof is failing due to installation error or normal Los Angeles sun exposure, the manufacturer won’t pay for the replacement. We can review your warranty status with you, but don’t count on the manufacturer to fund the job. Call (945) 303-9821 and we’ll walk through it honestly.
Most homes are done in 2 to 5 days once materials are on site, depending on roof size, pitch, and how much decking needs replacing. The permitting step adds time before we start, and that varies by LADBS workload. We’ll give you a schedule in writing before the job begins.
Partial replacement is possible in specific situations, like isolated storm damage, but it’s rare that it makes good sense. L.A. sun ages adjacent sections unevenly, and you’ll see a visible color and texture difference between old and new shingles. In most cases, a full replacement is the right call. We’ll show you the numbers for both options and let you decide with the price in hand.
No. That’s the point of the written price. We inspect before we quote, and if we find decking rot once the old roof is off, we replace it at the per-sheet price that’s already written in your estimate. You’ll never get a surprise change order from our crew. Know the price before the first tile moves.
Yes. Roof replacement requires permits through LADBS, and we pull them, pay the fees, and schedule the inspection. A roof without a proper permit can become a problem when you sell the house, and it’s not a corner we’re willing to cut.
Written by Greg Holloway, Owner, Tilehurst Roofing at Tilehurst Roofing, serving Los Angeles and nearby areas.






Before
After
Before
After
Before
After