Boral Roofing Company Nationwide

Boral Roofing Company in Los Angeles: What to Know First

We repair and replace Boral roofs across Los Angeles as an independent Boral service provider, and most jobs are diagnosed within one visit and finished the same week. Boral tile and steel roofs are common here, and the honest truth about cost is this: minor repairs run $350-$900, section rebuilds run $1,200-$3,800, and full reroofs start around $18,000 depending on pitch, height, and decking condition. You’ll get a written price before any work starts, not a ballpark that changes at the door. This page is for Los Angeles homeowners who already own a Boral roof and need a roofing company that knows the product well enough to fix it right the first time. Call (945) 303-9821 and a live person picks up, day or night.

Call (945) 303-9821

How Boral Products Fail - and How We Fix Them

Boral makes a solid product, but every roof in Los Angeles eventually meets the sun, the Santa Anas, and the marine layer. Here’s what we actually see on Boral jobs in this city, and what we do about it:

• Boral Concrete Tile (the standard flat-profile tile on thousands of L.A. tract homes): The tile itself rarely fails. What fails is the underlayment beneath it, which breaks down after 25-30 years of heat and UV exposure. The symptom is a leak that seems to move, because water travels along the old felt before it finds a crack in the decking. We lift the tile, replace the underlayment in sections, and reset the same tile if it’s sound. If it’s not, we match it from Boral’s current concrete line rather than mixing brands that weather differently.
• Boral Steel roofing (Boral acquired steel lines before transitioning their full range): Steel panels hold up, but the fasteners don’t always. In Los Angeles neighborhoods within a few miles of the coast, we regularly see neoprene washers on older Boral steel fasteners break down from salt air and temperature swings. Water gets in around the screw, not through the panel. We replace fasteners with zinc-capped screws and field-test every one before we call the job done.
• Boral clay tile on older Spanish and Mediterranean homes in Pasadena, San Marino, and the foothills: The known weak point is broken hip and ridge caps, usually from foot traffic or tree limbs. A cracked ridge cap lets water straight into the roof cavity, and it’s the first place we check on any Boral clay job. Replacing a ridge cap section is straightforward, but the mortar bed must be matched to what’s already up there or the repair looks like a patch job within a season.
• Valley flashing failures on Boral tile of every type: Los Angeles roof valleys carry a lot of water in a short time during winter storms. When the metal valley lining corrodes or separates, water backs up under the tile and into the decking. We replace the valley metal, not just patch it. A patch fails. A proper valley replacement gives you another two decades.
• Soffit and eave rot under Boral eaves: Boral roofing systems rely on clean eave lines to shed water. When gutters clog with eucalyptus or palm debris (both everywhere in Los Angeles), water backs up and rots the fascia and rafter tails. The tile looks fine from the street, but the rot spreads underneath. We cut out the bad wood, replace it with pressure-treated stock, and reset the tile edge with proper drip edge. Drip edge is the metal lip that directs water into the gutter, and on Boral jobs it’s non-negotiable.

Our Boral Roofing Company Process

Here’s how a Boral job goes with us, from the first call to the guarantee:

1. 1
   You call (945) 303-9821. A live person answers, asks about the roof, and books a visit in a specific window. No voicemail queue.
2. 2
   We walk the roof. Greg Holloway or one of our Boral-trained techs inspects the tile or steel line, the flashing, the underlayment, and the decking from the attic side if we can access it.
3. 3
   We give you a written price. Before anything gets touched, you know the number. Know the price before the first tile moves. That’s part of The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it.
4. 4
   We make the parts call. Where Boral OEM components are available and warranty-safe, we use them. Where an aftermarket flashing or fastener outperforms the original, we tell you why and get your sign-off before ordering.
5. 5
   We do the work and test it. Every Boral repair gets a water test where it’s possible, and a visual check from ridge to eave. We don’t guess. We verify.
6. 6
   You get the written guarantee. It’s in your hand before the crew rolls out, covering the repair for a full year under the 365-Day Done Right Promise. If the repair fails inside that window, we come back at no charge.

What Boral Roofing Company Costs in Los Angeles

Small Boral repairs in Los Angeles, like replacing a few cracked tiles or resealing a pipe flashing, typically run $350-$900. Repairing a leaking valley or re-flashing a chimney usually runs $1,100-$2,400. A section rebuild, where we lift tile, replace underlayment, and reset everything, lands between $1,800 and $3,800 depending on slope and access. Full Boral roof replacement in Los Angeles starts around $18,000 for a simple one-story and climbs with steep pitches, two-story decking replacement, and clay tile. What moves the price: roof pitch, story height, tile profile, and how much decking has rotted under the old underlayment. Call (945) 303-9821 for an exact quote. Estimates are free, and the price you’re quoted is the price on the contract.

Why Los Angeles Homeowners Call Tilehurst Roofing for Boral Work

Tilehurst is part of the Kingswell family of roofing companies, founded in 2000, and built for homeowners who’ve already been burned by a no-show or a price change at the door. Greg Holloway grew up in Eagle Rock and learned the trade at Los Angeles Trade-Technical College, where sloppy flashing wasn’t something you left behind. We apply that to every Boral job. Every repair carries a written guarantee delivered before the crew leaves. Every call is answered by a live person, 24 hours a day. And if you ever decide Boral isn’t the right product for a replacement, we also work with GAF, Owens Corning, CertainTeed, and four other manufacturers, so the material fits the home, not just what happens to be on the truck.

FAQs