Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterOwens Corning Roofing in Fort Lauderdale, CA | Tilehurst Roofing
We provide independent Owens Corning Roofing Company in Fort Lauderdale service across the area, from Coral Ridge to Rio Vista and every canal-lined street between. We’re not an Owens Corning dealer or an authorized warranty shop, which means we can pair their shingles with whatever HVHZ-approved underlayment, fasteners, and flashing actually pass a Broward County inspection. If you need Owens Corning shingles replaced, repaired, or spec’d into a full re-roof, call (945) 303-9821 for a written estimate before any work starts.
Why Fort Lauderdale Residents Choose Us for Owens Corning Service
Most Fort Lauderdale homes were built between the 1950s and 1970s as concrete block stucco, and a lot of those roofs are original or second-layer. That means the Owens Corning shingles you see from the street are sometimes the least of the problem. What’s underneath them, the decking and underlayment and fasteners, is where Broward County inspectors focus, and it’s where we spend our time too.
Greg Holloway, our owner, grew up in Eagle Rock and learned roofing at Los Angeles Trade-Technical College, where instructors treated a sloppy flashing job the way a surgeon treats a bad stitch. He’s carried that standard into every Fort Lauderdale roof we touch. We use genuine Owens Corning shingles and WeatherLock underlayment when they carry a current Miami-Dade/Broward Notice of Acceptance, and we use HVHZ-approved aftermarket fasteners and flashing where Owens Corning doesn’t manufacture the accessory. You get the brand you asked for, installed in a way that actually passes inspection here.
Common Owens Corning Roofing Problems We Solve in Fort Lauderdale
- Severe granule loss from UV exposure. Fort Lauderdale sits at a subtropical latitude with some of the highest UV index readings in the continental U.S. Oakridge and Duration shingles oxidize here faster than they would in Tampa or Orlando. We see exposed, embrittled asphalt on roofs that are only ten or twelve years old.
- Wind-driven rain intrusion at seams and nail lines. Those June through October afternoon thunderstorms hit hard and repeat daily. Where Owens Corning shingles were installed over non-NOA underlayment, water finds its way in at field seams and nail penetrations. The shingles look fine. The underlayment already failed.
- Rusted fasteners and valley flashing from canal salt air. Fort Lauderdale has over 300 miles of inland canals, and they carry salt aerosol miles from the beach. We routinely find nail heads and flashing corroded through on roofs that still look intact from the curb. Rio Vista and Victoria Park see this worst.
- Ridge vent and hip/ridge shingle failure after gust events. Standard ridge components attached with non-HVHZ fasteners fail after repeated 100+ mph gusts. The nails rust, the cap shingles lift, and the ridge vent becomes a water entry point. We replace them with approved fasteners and properly spec’d accessories.
- Shingles layered over failed flat roof sections. Many CBS homes in Coral Ridge and Victoria Park have low-slope built-up or modified-bitumen sections hidden under shingle over-builds. The Owens Corning shingles hold up fine, but the substrate rots out from ponding water, and the whole assembly needs a tear-off the original shingle warranty never anticipated.
Owens Corning Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Here’s the thing most roofers passing through after a hurricane don’t understand about Fort Lauderdale. A standard re-roof here requires a Broward County permit with a mandatory mid-job inspection specifically verifying hurricane strap or clip connections at every rafter tail. Inspectors will fail the job and require decking removal if clips are missing. That’s a hard scheduling hold-point that doesn’t exist in most other Florida counties. For an Owens Corning roof, it means the shingle choice is secondary to the fastening schedule. We’ve torn off Owens Corning roofs in Coral Ridge where the shingles still had years of life, but the fasteners had corroded from canal air and the clips weren’t there at all. The homeowner paid for a brand and got a substrate problem instead. Knowing the difference is what keeps a Fort Lauderdale Owens Corning roof on the house through the next storm season.
Owens Corning Models & Products We Service in Fort Lauderdale
We work with the full Owens Corning residential lineup that carries current NOA approval: Oakridge Architectural Shingles, Duration Premium Shingles, TruDefinition Duration Shingles, and WeatherLock Underlayment. Where homeowners want a specific color or profile, we can source it directly through local Fort Lauderdale suppliers rather than waiting on a warehouse order. We stock the most common Duration and Oakridge colors locally for faster turnaround on repairs, along with approved starter strips and ridge components. For fasteners, edge metal, and flashing, we use HVHZ-approved aftermarket products. Owens Corning doesn’t manufacture every accessory your roof needs, and passing a Broward inspection matters more than brand-matching a nail.
Owens Corning Service Pricing in Fort Lauderdale
Spot shingle repair on an Owens Corning roof in Fort Lauderdale typically runs $380 to $850 depending on the number of shingles, ridge cap, and whether flashing needs replacement. A full re-roof with Owens Corning Duration shingles, WeatherLock underlayment, and HVHZ-approved fasteners on a standard 1,800-square-foot CBS home generally lands between $14,000 and $24,000. The variables are decking condition, how many failed layers need tear-off, and whether the mid-job strap inspection reveals missing clips that require additional work. Every estimate is written, line-itemed, and in your hands before a single shingle comes off. Call (945) 303-9821 for a free estimate, and know the price before the first tile moves.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Owens Corning Roofing in Fort Lauderdale
Yes, but only the specific Owens Corning lines and underlayment products that carry a current Miami-Dade/Broward Notice of Acceptance. Oakridge, Duration, and TruDefinition Duration shingles all have NOA listings, as does WeatherLock underlayment. What often doesn’t pass is the installation, the fasteners, the clips, and the edge metal used alongside the shingles. That’s why we source HVHZ-approved fasteners and flashing separately rather than trusting whatever comes bundled. If you want to confirm your specific roof meets code, call (945) 303-9821 and we’ll walk it with you.
Fort Lauderdale combines three things Tampa doesn’t have in the same concentration: over 60 inches of annual rainfall arriving in violent afternoon thunderstorms, some of the highest UV index readings in the continental U.S., and salt aerosol carried inland by 300-plus miles of canals. That trio degrades asphalt faster, stresses seams harder, and corrodes fasteners and flashing from below. A shingle that lasts twenty years in Tampa might look embrittled and thin in Fort Lauderdale after twelve. If yours failed early, the fasteners and underlayment probably went first. Call (945) 303-9821 and we’ll tell you whether what you’re seeing is shingle failure or a substrate problem.
Yes. Broward County requires a mid-job inspection to verify hurricane strap or clip connections at every rafter tail before the roof assembly is closed up. If the inspector finds clips missing, the job fails and decking comes off until the connections are exposed and corrected. We build that hold-point into the schedule before work starts, so you’re not caught paying for a surprise tear-off mid-project. Call (945) 303-9821 for an estimate that includes the inspection timeline.
Sometimes. If the shingles are the only failing component and the underlayment, decking, and fasteners are still sound, we’ll do a spot Roof Repair in Fort Lauderdale with genuine Owens Corning shingles and send you a written guarantee before the crew leaves. But if the underlayment has failed or the decking is rotted, especially on the flat sections common on Fort Lauderdale CBS homes, a patch won’t pass inspection and won’t keep water out through the next storm. We’ll tell you straight which situation you’re in. Call (945) 303-9821 for a free evaluation and a written price either way.
We use WeatherLock underlayment and genuine Owens Corning shingles whenever they carry a current NOA, which is non-negotiable inside the HVHZ. For fasteners, flashing, and edge metal, we use HVHZ-approved aftermarket products from local Fort Lauderdale suppliers. Owens Corning doesn’t manufacture every accessory a Broward County roof requires, and we won’t install a non-approved part just to keep a brand label consistent. Call (945) 303-9821 if you want a line-by-line breakdown of what goes on your roof.
Service Areas Near Fort Lauderdale
We serve homeowners throughout the Fort Lauderdale metro, including Oakland Park, Wilton Manors, Lauderdale-by-the-Sea, Dania Beach, and Plantation. If you’re outside the immediate Fort Lauderdale area, our Owens Corning sales & service team can point you to options across South Florida. We also maintain Fort Lauderdale service area coverage for full roof replacements and storm repairs, and for homeowners further west we offer Owens Corning service in Glendale and Owens Corning service in Ontario through our Kingswell family locations.
Book Your Owens Corning Service in Fort Lauderdale Today
Call (945) 303-9821 to schedule a free Owens Corning roof evaluation in Fort Lauderdale. You’ll get a written, line-item price before any work starts, and every repair carries a written guarantee. A live person answers, day or night.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Fort Lauderdale with independent Owens Corning service.