Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roof Replacement Across Brea
A full roof replacement in Brea typically runs $11,000-$24,000 for a standard asphalt shingle home, with concrete or clay tile on hillside properties landing between $22,000 and $45,000. Most jobs are completed in 1-2 weeks once materials arrive. Call (945) 303-9821 for a free written estimate, and we’ll put a line-item price in your hands before any work starts.
Brea isn’t one roofing market. It’s two. The flat valley-floor tracts off Imperial Highway and Birch Street have completely different needs than the steep hillside streets winding through Country Hills and Carbon Canyon. Our crews work both, every week, and we’re familiar with what each one demands: from CAL FIRE material submittals in the foothill Very High Fire Hazard Severity Zone to aging 1970s three-tab asphalt down in the flats. One phone call gets you a crew that actually knows which side of Brea you live on.
Why Tilehurst Roofing Is Brea’s Preferred Roof Replacement Company
Tilehurst Roofing is the local member of the Kingswell family of roofing companies, founded in 2000. Greg Holloway leads our Brea-focused team, and our reputation here is built on the same thing every time: a written price before any work begins, a crew that shows up in the window we promised, and a 365-Day Done Right Promise that backs every job for a full year. If something isn’t done right, we make it right. That’s in writing before a single nail is driven.
Brea homeowners tell us the same story again and again: a contractor no-showed, or changed the price at the door, or completed a repair that failed within a month. That’s exactly who we’re not. Our technicians are background-checked and uniformed, so you know who’s on your roof. And when you call (945) 303-9821, a live person picks up. Not a voicemail, not a callback queue. 24 hours a day, 7 days a week, including evenings and weekends. For Brea residents who’ve been burned before, that reliability is the whole point.
New Roof Installation in Brea
New roof installation in Brea is typically for new construction, an addition that expands or changes roof lines, or a teardown-to-frame replacement where the existing system is beyond salvage. Unlike a straight reroof, new installation often means all-new decking, underlayment, flashing, and ventilation, starting from the top plate up. For a standard Brea valley-floor home, new architectural asphalt installation runs $13,000-$26,000. For a steeper hillside lot in Carbon Canyon or Country Hills with concrete or clay tile, expect $24,000-$48,000.
Complete Tear-Off
When decking is rot-compromised or the old roof has multiple failed layers, we tear down to the rafters. New decking goes down, seams are spaced to code, and the underlayment goes on in the right order. We pull the permits, schedule the inspections, and don’t cover anything up until the inspector signs off.
New-Build and Addition Roofing
Building on acreage around Brea often means county permitting rather than city permits, plus septic and well setbacks that can change where and how a roof is structured. Our crew coordinates with the general contractor and local building officials to ensure roof assembly meets both structural and fire-code requirements before framing begins.
Reroofing in Brea
Reroofing in Brea means replacing the existing roofing system while leaving the structural framing in place. Most valley-floor tract homes built between the late 1960s and the 1980s are now hitting their second full replacement cycle, and the original three-tab asphalt or concrete tile is long past its warranted life. Reroofing those homes runs $10,000-$22,000 for architectural asphalt, $20,000-$40,000 for concrete tile, and $26,000-$42,000 for standing seam or flat-roof systems on low-pitch sections.
Tile Recovery vs. Full Tear-Down
When the concrete or clay tile is still structurally sound, a recovery reroof replaces the underlayment and fastening system while reusing the original tile. That’s common in Brea’s foothill tracts, but it’s not always possible after years of Santa Ana gusts and UV damage. If the tile is cracked, spalling, or no longer meets Class A fire-rating standards, a full tear-down and reinstallation is the only compliant approach.
Wind-Rated Underlayment
The Carbon Canyon corridor funnels Santa Ana wind events directly into hillside neighborhoods, and loose ridge caps and lifted tile leading edges are the most common failure pattern we see after every major wind event. Reroofing in those areas means upgrading the underlayment and fastening pattern beyond valley-floor spec, using high-wind-rated products and ember-resistant detailing that meets the VHFHSZ submittal requirements.
Trusted Brands We Service in Brea
We install materials from seven leading manufacturers, so the roof fits your Brea home, not just what happens to be in the warehouse. For most valley-floor Brea homes, architectural asphalt shingles from GAF, CertainTeed, or Owens Corning strike the right balance of durability and cost. For hillside properties in Country Hills and Carbon Canyon, where the VHFHSZ demands Class A fire-rated assemblies, we source tile and steel from Boral, IKO, and Tamko. Only about one in every five Brea roof replacements we quote ends up using tile, and that’s usually on the steeper foothill slopes where the fire-code and wind exposure make shingles a compromise rather than a genuine fix. Every material is ordered locally and delivered when needed, so your job doesn’t stall while we wait on freight. Your estimate lists the brands and product lines we plan to install, along with the exact material costs, before you approve anything.
Common Roof Replacement Problems We See in Brea Homes
- UV-degraded underlayment hidden under 1970s concrete tile: Brea sits inland and runs meaningfully hotter and drier than coastal Orange County, and over 40 or 50 years that heat bakes underlayment until it crumbles. Homeowners see intact-looking tile from the street and don’t realize the waterproofing layer underneath has failed until tear-off exposes it.
- Loose ridge caps and lifted tile leading edges from Santa Ana events: The Carbon Canyon corridor accelerates wind, and windward slopes lose ridge caps and tile leading edges on a regular basis. Missing or cracked tile on a VHFHSZ property isn’t just a leak risk, it’s a fire-code violation that inspectors will flag on a re-roof permit.
- Rotted decking on 1960s-1980s valley-floor tracts: Original three-tab asphalt roofs have been through two replacement cycles, and by now the roof decking beneath them is often soft or delaminated in valleys and eaves. Homeowners only discover this when the old roof comes off and the extent of rot becomes visible.
- Flat or low-slope sections that pool water: Many Brea valley-floor homes have low-pitch or built-up sections over additions and patios. Without proper slope and drainage, these areas hold water, degrade the roofing material, and eventually leak. A proper replacement requires addressing the drainage, not just swapping the membrane.
Pricing for Roof Replacement in Brea, CA
Most standard asphalt-shingle roof replacements in Brea run $11,000-$24,000, depending on square footage, slope, and whether decking needs replacement. Concrete or clay tile on hillside properties typically lands between $22,000 and $45,000, largely because of steep-pitch staging requirements and the CAL FIRE material submittals mandated by the Very High Fire Hazard Severity Zone. Flat or low-slope sections usually run $8,000-$18,000 as separate scopes. The fastest way to know your exact number is to call (945) 303-9821 and schedule a free on-site estimate. We’ll measure your roof, check the current material condition, and hand you a written, line-item price before any work starts. No change orders, no door-price surprises.
We Also Serve Cities Near Brea
Many of our Brea customers refer us to family and friends in Brea and the surrounding communities, and we regularly work in Fullerton, Rowland Heights, La Habra, and Placentia. If you’re just down the road in one of those cities and need a roof replacement, give us a call at (945) 303-9821. We’ll bring the same written pricing and the same Roof Replacement team that we bring to every Brea job.
Serving Brea, CA - Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Brea
Yes. Country Hills and Carbon Canyon sit inside California’s Very High Fire Hazard Severity Zone, so a roof replacement there requires Class A fire-rated roofing assemblies and ember-resistant detailing. On the valley floor, a standard architectural shingle system meets code. A mile away in the hills, you may need tile or a top-tier shingle combined with fire-rated underlayment and specific valley and penetration details. The material choice isn’t preference; it’s a permit requirement.
Call (945) 303-9821 for an exact quote on your specific hillside or valley-floor property. Estimates are free.
Wind exposure in the Carbon Canyon corridor dictates both the fastening pattern and the underlayment. Homes on the windward slope of hillside streets lose ridge caps and tile leading edges in Santa Ana events when the original installation didn’t use high-wind fasteners. A replacement in those areas may require upgraded underlayment, additional fasteners per tile, and wind-rated ridge caps. If your roof isn’t detailed to that spec, the first major wind event will find the weak points.
For an exact assessment of your roof’s wind exposure, call (945) 303-9821. Estimates are free.
Yes, it changes scope. A hilltop Brea property on acreage often has separate structures that need their own roofing work, and those structures may have different code requirements. A detached shop or ADU on the same parcel factors into the quote as a separate scope, with its own material and labor. Equipment access and material staging on open lots can also add time, especially on steeper terrain where cranes and material lifts are required rather than ground-level staging.
If you have outbuildings, a detached shop, or a guesthouse on your Brea lot, call (945) 303-9821 and we’ll scope all of it in one visit. Estimates are free.
Foothill permits in the VHFHSZ trigger CAL FIRE-compliant material submittals that aren’t required a mile down the slope. The city and county review those submittals before issuing the permit, and missing or cracked tile on a hillside property is flagged as a fire-code compliance defect, not just a leak risk. That additional review and the material documentation it requires can add days or weeks to the permit timeline.
To find out how long your specific Brea roof permit will take, call (945) 303-9821. We’ll pull the records and give you a realistic timeline.
Expect the unexpected. Original 1970s tract roofs in Brea hide UV-degraded underlayment, failed flashing, and rotted decking that only becomes visible once the old material comes off. We plan for that by pricing decking replacement as a per-sheet line item. After tear-off, we inspect the exposed decking, document what’s rotted or delaminated, and replace it before laying the new roof. We don’t cover anything up until you’ve seen what’s underneath, and any decking replacement is shown as a written line item during the job, not added as a surprise at the end.
For a walkthrough of what your specific 1970s Brea roof is likely to reveal once it’s opened up, call (945) 303-9821. Estimates are free.
Call Tilehurst Roofing for Your Brea Roof Replacement
If you live in Brea and need a roof replacement, call (945) 303-9821 today. Greg Holloway and the Tilehurst Roofing team will come out, look at what you’ve got, and hand you a written, line-item price before any work begins. No pressure, no door-price changes, and a full year of accountability under our 365-Day Done Right Promise. We answer the phone when you call, day or night.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Brea since founding in 2000.