Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Dixon
Roofing in Dixon isn’t a generic Sacramento Valley job. The Delta Breeze funnels off the Carquinez Strait and hits this open, flat terrain harder than almost anywhere else in Solano County, which means wind-lifted shingle corners, breached ridge caps, and flashings that fail years before they would in Woodland or Davis. If you’re searching for a Roofing Company that understands Dixon’s specific wind and heat profile, you’ve found one. We answer the phone live, every time, and we put the price in writing before a single nail goes in. Call (945) 303-9821 for a free estimate.
Why Tilehurst Roofing Is Dixon’s Preferred Roofing Company
Dixon homeowners call us after other contractors have already let them down once. That’s the pattern we see: a repair done with Sacramento-spec fasteners, a crew that showed up two days late, a verbal quote that doubled at the door. We do the opposite. Every Tilehurst job starts with a written price before any work begins, and every repair carries a written guarantee delivered before the crew leaves your property. If that repair fails inside the guarantee period, we return at no charge under the 365-Day Done Right Promise. No fine print, no phone tag, no “we’ll get back to you.”
You’ll also know exactly who is on your roof. Every Tilehurst technician serving Dixon is background-checked and uniformed. Greg Holloway, who leads our Dixon work, has spent years in this trade and knows what Delta wind does to a 20-year-old three-tab roof. We don’t send subcontractors we just met to your house. We send our own people, and they leave your yard cleaner than they found it.
Commercial Roofing in Dixon
Commercial Roofing in Dixon means working with low-slope and flat roofing systems on warehouses, retail pads, and agricultural buildings across the 95620 corridor, where afternoon Delta winds and 100°F summers punish membrane seams and edge metal far faster than coastal crews expect. Most commercial flat roof repairs in Dixon run $850-$2,400 depending on membrane type and square footage, while full replacements typically land between $6 and $9 per square foot. If someone quotes you less, ask what membrane gauge they’re using and whether the edge metal is hot-dip galvanized or painted steel. The painted steel fails first.
Flat Roof Repairs and Re-Coating
Flat roofs in Dixon’s commercial district take a beating from UV heat that cooks single-ply membranes until seams loosen, then the afternoon wind works those seams until they tear. We repair TPO, EPDM, and modified bitumen systems, and we always inspect the counterflashing and edge metal while we’re up there. A small seam failure left alone becomes a full membrane replacement within two wet seasons, so we fix it at the repair stage and document everything with photos you can keep.
Drainage and Parapet Flashing
Most commercial leaks in Dixon trace back to clogged internal drains or failed parapet cap seams, not the membrane itself. The Delta wind drives rain sideways, so parapet flashing that would hold in Vacaville lets water in here. We rebuild parapet caps with hot-dip galvanized metal and seal all seams with marine-grade sealant specified for salt-air exposure. Your building’s sprinkler lines and electrical runs stay dry, and the repair holds through winter.
Metal Roof Installation in Dixon
Metal Roof Installation in Dixon suits the local climate better than almost any other material. Standing seam metal withstands the thermal cycling of 100°F summers without cracking, and properly fastened panels laugh at the afternoon wind that lifts shingle corners all over town. A full standing seam metal roof in Dixon typically runs $14-$18 per square foot installed, depending on panel profile and whether we’re tearing off old material or installing over a clean deck. Kynar-coated galvalume and aluminum both hold up well here; painted galvalume without Kynar fades and chalks within a decade.
Standing Seam for Residential and Ag Buildings
Dixon’s older farmhouses and newer acreage properties both benefit from standing seam’s interlocking panel design, which leaves no exposed fasteners for wind to work loose. We also install metal on agricultural outbuildings, machine sheds, and shop buildings throughout the Dixon Ridge area. The key is the clip-and-batten system we use: hidden clips allow the panels to expand and contract through 60°F daily swings without pulling loose from the decking.
Metal Overlay vs. Full Tear-Off
Sometimes you can install metal directly over a single layer of old composition shingles, which saves haul-away costs and keeps the job to a day or two in Dixon. Other times, especially on older wood-frame homes near downtown Dixon with layered re-roofing, the decking is too compromised and a full tear-off is the only honest option. We’ll tell you which applies to your house before you spend a dollar, and the written quote covers either path. No change orders when we find deck rot, because we include deck repair in the line items from the start.
Trusted Brands We Service in Dixon
We install and repair materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, because Dixon’s housing stock spans everything from 1990s tract homes with original concrete tile to older downtown bungalows with layered composition roofs. Your home gets the product that fits its structure and exposure, not whatever happens to be stacked in our truck that week. For Dixon homeowners specifically, we often specify Atlas architectural shingles with a six-nail pattern or Boral concrete tile with upgraded underlayment, because both hold up under the heat-and-wind cycle better than budget three-tabs. We keep the most commonly needed Dixon materials stocked locally, which means less wait time on replacements.
Common Roofing Problems We See in Dixon Homes
- Wind-lifted tab corners on 3-tab shingles. The afternoon Delta Breeze funnels through the Carquinez Strait and hits Dixon’s open, flat terrain with nothing to slow it down. Corners that a Sacramento wind would leave alone get lifted and creased here, then winter rain finds the gaps.
- Thermally fatigued underlayment on 1990s-2000s tract roofs. Dixon’s population boom in that era means thousands of homes with original concrete tile roofs whose underlayment is now brittle and cracked. The surface tile looks fine, but the waterproof membrane beneath is quietly failing in the valleys and penetrations.
- Corroded drip edge and flashing from salt-laden marine air. That Delta breeze isn’t just wind; it carries salt aerosol from the bay and strait. Cheap galvanized drip edge that holds up inland starts rusting here within a few seasons.
- Breached ridge caps on low-to-mid-slope tract homes. Homes that would pass inspection in Vacaville or Sacramento routinely show ridge cap failures in Dixon after just a few winters, because the wind loads on exposed ridge lines are measurably higher here.
On a wind-exposed block in Dixon’s 1990s tract corridor, our crew opened a three-tab roof where the surface looked sound but the underlayment was already brittle and torn under three tab corners. We stripped to the decking, replaced the fasteners with hot-dip galvanized hardware, and reset the ice and water shield at the valleys and penetrations before locking down new architectural shingles with a six-nail pattern and starter strip. The homeowner’s neighbor, who patched instead of re-specifying hardware, was chasing leaks again the following winter. Same block, same wind, same roof age. Different fastener spec, different outcome.
Pricing for Roofing Company in Dixon, CA
Most asphalt-shingle repairs in Dixon run $350-$900 for localized damage like lifted corners, small leaks, or missing shingles. A roof inspection with a written condition report runs $195-$395, and that cost is waived when you proceed with Roof Replacement in Dixon. Full tear-off and replacement on a typical 1,800-2,400 square foot Dixon tract home lands between $11,500 and $18,000 for architectural shingles with new underlayment, drip edge, and ridge cap. The price gap between a coastal-spec job and an inland-spec job is roughly $800-$1,500 on an average roof, which buys you hot-dip galvanized fasteners, upgraded underlayment, and marine-grade flashing sealant. Skip that spec now and you’ll pay for a second repair inside a decade. Call (945) 303-9821 and we’ll walk your roof with you and hand you the written quote before we leave.
We Also Serve Cities Near Dixon
Our crews regularly work throughout Solano and Yolo counties, including Davis, Vacaville, Winters, and Woodland. If you’re a Roofing Company in Dixon customer, we’re already nearby; if you’re a few miles out, call (945) 303-9821 and we’ll tell you when we can be there.
Serving Dixon, CA - Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Dixon
Dixon sits in the Delta wind corridor where marine air funnels from the Carquinez Strait through open, flat terrain with no tree canopy to buffer it. Your brother’s roof in Woodland doesn’t get the same sustained afternoon uplift stress, so the same three-tab shingle and the same standard fasteners last years longer there. Call (945) 303-9821 and we’ll explain exactly what your specific roof needs after a free inspection.
The tile itself isn’t the waterproof layer; the underlayment beneath it is, and on Dixon’s 1990s-era tract homes that underlayment is now 25-30 years old and thermally fatigued from a quarter-century of 100°F summers. We often re-underlay existing concrete tile roofs without replacing the tile, which costs $4,500-$8,500 for a typical Dixon home and buys you another 30 years. We’ll tell you if your tile can be reused; if it can, you save thousands versus a full tile replacement.
Yes. The wind loads on Dixon’s exposed ridge lines and open neighborhoods exceed what standard Sacramento-spec fastening patterns are designed for. We specify hot-dip galvanized hardware and six-nail patterns on architectural shingles in Dixon, which adds about $800-$1,500 to a full roof job but prevents the lifted corners and breached ridge caps that plague patched-over roofs here.
Ask for at least a 110 mph wind rating with a six-nail fastening pattern, and insist on written confirmation that the manufacturer’s wind warranty applies at that spec. In Dixon, a roof that meets the minimum code passes inspection but fails the actual wind conditions; we install to the higher standard as default because we’ve seen too many “code-approved” roofs leaking here within five years. We’ll include the exact shingle, fastener, and underlayment spec in your written quote.
Read the line items. One bid includes hot-dip galvanized flashings and architectural shingles with a six-nail pattern; the other uses three-tab and painted steel edge metal and four nails. The second bid looks cheaper today and costs $4,000-$6,000 more inside a decade. Our written quote shows exactly what you’re getting, down to the fastener type, and Greg Holloway personally reviews every Dixon estimate before the crew rolls out. Call (945) 303-9821 and we’ll help you compare what you’re holding.
If your roof is showing lifted corners, valley leaks, or just age, don’t wait for the next winter storm to find the gap. Call (945) 303-9821 and schedule a free inspection. We’ll walk the roof with you, point out what’s failing and what’s holding, and put the written estimate in your hands before we leave. Tilehurst Roofing – a Kingswell family company – serves Dixon homeowners who want the job done right and the guarantee in writing.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Dixon, CA.






Before
After
Before
After
Before
After