Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roofing Company Across Margate
Most roofing work in Margate runs between $450 and $1,200 for a focused repair, while a full flat-roof replacement on one of the city’s older CBS-block homes typically lands between $14,000 and $28,000 depending on decking condition and the system you choose. Those numbers come from the specific way Margate was built, and they’re what you should expect before anyone touches your roof. Our crews know the streets here: Royal Palm Boulevard, the platted neighborhoods off Rock Island Road, the 1960s tract blocks down by Winfield Boulevard. If you need a Roofing Company in Margate that shows up when it says it will and hands you a written price before any work starts, call us at (945) 303-9821.
Greg Holloway leads our Margate work, and he’s direct about what this city’s roofs actually require. You’ll get that same directness from every tech we send.
Why Tilehurst Roofing Is Margate’s Preferred Roofing Company Company
Tilehurst Roofing operates as part of the Kingswell family of roofing companies, founded in 2000, and the Margate location runs on a simple rule: a written price is in your hands before a single nail is driven. No change orders at the door. No Monday-morning phone call saying the decking was worse than we thought. We inspect first, quote honestly, and then do the work.
Our Roofing Company team has spent years on Margate’s specific housing stock: concrete block homes built between 1958 and 1978, most with flat or low-slope decks that were never designed for the rainfall South Florida gets now. We know what hides under those old tar-and-gravel layers because we’ve opened enough of them. That’s not a generic claim. It’s the difference between a quote that survives permit review and one that blows up at the building department.
Every call is answered by a live person, 24 hours a day, including weekends. Every repair carries a written guarantee handed to you before the crew leaves. And every job is covered by our 365-Day Done Right Promise: if something isn’t right within a full year, we come back and make it right at no charge.
Free Roof Estimate in Margate
A Free Roof Estimate in Margate means we walk your roof, document what’s there, and give you a written line-item price before you commit to anything. This is how we work on every single job. The estimate covers roof condition, decking integrity, drainage slope, flashing at penetrations, and whether the existing system meets current HVHZ code. You’ll know exactly what needs doing and what it costs, in writing.
What the Walk Covers
We check the roof surface itself, but we also look at the drip edge, the fascia, the underlayment condition, and any signs of ponding water. On Margate’s flat decks, ponding is the thing that kills membranes early. We’ll photograph everything and explain it in plain language, not trade shorthand.
What You’ll Have Afterward
You’ll have a written proposal with material options from GAF, Atlas, and Boral among the seven manufacturers we carry, plus a clear scope of work. No verbal handshake numbers. No “we’ll figure it out as we go.” Just a price you can hold us to.
Roofing Contractor in Margate
A Roofing Contractor in Margate needs to understand two things most contractors outside Broward County do not: HVHZ product approval rules, and the 25% patching threshold in Florida code that turns a small repair into a full replacement. Both of these hit Margate harder than almost anywhere else in South Florida because of how and when the city was built.
HVHZ Compliance on Every Layer
Broward County sits inside Florida’s High Velocity Hurricane Zone, one of only two counties in the state with that designation. Every roofing product and assembly we install in Margate must carry a Florida Product Approval specifically listing HVHZ compliance. Materials routinely installed 20 miles north in Palm Beach County get rejected by Margate’s permit office. We verify product approvals before we quote, not after.
Permit-Ready Documentation
When we quote a Margate job, the permit paperwork matches the scope. If your roof has had more than 25% of its total area patched over time, code says it’s a full replacement, not another patch. We flag that upfront so there are no surprises at the building department.
Trusted Brands We Service in Margate
We work with seven major manufacturers so the product matches the home. For Margate’s flat and low-slope decks, we commonly specify GAF’s HVHZ-approved modified bitumen systems or Atlas foam-adhesive assemblies. On the shingle side, Tamko and Boral both make high-wind-rated architectural lines suited to Broward’s wind-load envelope. We keep common flashing, drip edge, and underlayment inventory on the truck for Margate jobs, which means faster turnarounds when a repair can’t wait. You choose the manufacturer. We handle the install and the HVHZ paperwork.
Common Roofing Company Problems We See in Margate Homes
- Ponding water on original flat decks. Margate’s 1958-1978 CBS homes were built with drainage slopes that don’t handle today’s summer rainfall intensity. Standing water blisters membranes and rots fascia behind the drip edge, often hidden until a full tear-off.
- Soft decking under old tar-and-gravel layers. We frequently find original 2×8 decking softened at pipe penetrations and valleys that never drained correctly. It’s not visible from below until the roof is opened up.
- Patches pushing past the 25% threshold. Homeowners patch leaks here and there over the years, not realizing Florida code counts cumulative area. When the total crosses 25%, permit review requires a full HVHZ-compliant replacement. We catch this on the estimate, not at the permit counter.
- Non-HVHZ materials installed by out-of-county contractors. A roofer from Palm Beach County may quote products that are perfectly legal there but will be rejected by Broward’s building department. Always ask to see the Florida Product Approval listing HVHZ compliance for your specific assembly.
Pricing for Roofing Company in Margate, FL
A focused leak repair on a Margate flat roof runs $450-$1,200. A larger repair with decking replacement and new membrane section typically lands between $2,500 and $6,000. Full flat-roof replacement on a 1,400-1,800 square foot CBS home ranges from $14,000 to $28,000. Architectural shingle replacement on a low-slope gable runs $11,000-$19,000, though most of Margate’s older stock is flat, not gabled. What moves the number: decking condition, access for staging on a tight lot, and whether the existing system crosses the 25% threshold. Call (945) 303-9821 and we’ll give you a written estimate with real numbers for your specific roof.
We Also Serve Cities Near Margate
Our crews cover Margate and the surrounding communities: Coconut Creek, Coral Springs, Pompano Beach, and Plantation. If you’re just outside Margate proper, call us anyway. The HVHZ rules and pricing context carry across all of Broward County, and scheduling is coordinated from our South FL office to reach Margate neighborhoods quickly.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Margate
If the roof has been patched before, or if leaks are recurring, you’re likely past the 25% threshold and Florida code will require a full HVHZ-compliant replacement. Our estimate will measure total patched area against the roof’s square footage and tell you which side of the line you’re on before you spend a dollar. Call (945) 303-9821 for an exact assessment.
Margate sits in Broward County’s High Velocity Hurricane Zone, one of only two counties in Florida with that designation. Every roofing product and assembly must carry a Florida Product Approval specifically listing HVHZ compliance. Those approved products, plus the more stringent nailing patterns, secondary water barriers, and deck attachment details, add real cost to every job. A Palm Beach County quote using non-HVHZ materials will simply not pass permit in Margate.
It means the shingle, the underlayment, the fasteners, and the deck attachment all work as a tested assembly to resist wind uplift forces specific to HVHZ zones. A shingle with a high wind rating but installed over an unrated underlayment or with non-compliant fasteners doesn’t meet code. We specify assemblies from GAF, Atlas, and Tamko that carry HVHZ product approvals as complete systems, not just individual components.
Margate’s dense platted streets leave little room for dumpsters, material drops, and crew parking. Before we start, we walk the site and create a staging plan: where the dumpster goes, where materials are laid out, how debris gets removed. We notify adjacent owners with a party-wall notice before any work begins, and we respect City noise ordinances for work hours. A plan that keeps your neighbors informed is a plan that keeps your job moving without stop-work orders.
Flat roofs rely on drainage slope to shed water. Margate’s summer convective storms deliver short, intense rainfall that pools on improperly drained decks, and standing water accelerates membrane blistering and seam failures. Shingle roofs shed water by gravity pitch. A flat roof with even a slight sag becomes a retention pond, and the damage compounds with every storm. That’s why we check drainage slopes on every flat-roof estimate in Margate.
We tore off a 1,450-square-foot tar-and-gravel flat deck on a 1968 CBS block house off Royal Palm Boulevard and found the original 2×8 decking soft at two penetrations and a valley that had never drained right. Standing water had blistered the membrane and rotted the fascia behind the drip edge. Because Broward is HVHZ, every layer going back on had to carry a Florida Product Approval showing HVHZ compliance, so we re-decked, laid a self-adhered ice and water shield across the whole field, and finished with a GAF HVHZ-approved modified system. No Palm Beach County substitution was legal on that roof, and we knew it before the quote went out.
Call Tilehurst Roofing for Your Margate Roof
You’ve probably already dealt with a roofer who no-showed or changed the number at the door. We don’t do that. Every job starts with a written price. Every repair gets a written guarantee. Every call is answered by a live person. If you’re in Margate and your roof is telling you something’s wrong, call (945) 303-9821 and schedule your free estimate. Greg Holloway and the team will be straight with you about what it costs and what it needs.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Margate under the Kingswell Guarantee.