Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roofing Company Across Tiburon
If you’re looking for a roofing company that actually shows up when it says it will, writes the price down before touching your roof, and stands behind the work for a full year, you’ve found us. Tilehurst Roofing serves Tiburon homeowners with roof repair, full replacement, inspections, and the kind of honest pricing that feels rare in this trade. We know the hillside lots, the mid-century flat sections, and the salt air that eats metal faster here than almost anywhere in Marin. Call (945) 303-9821 and a live person answers, day or night.
Why Tilehurst Roofing Is Tiburon’s Preferred Roofing Company Company
Tiburon homeowners don’t just need a roofer. They need someone who understands what the Bay does to a roof over twenty or thirty years. That’s the work we do every week. Our Roofing Company team arrives in Tiburon with a written scope, a material plan, and the expectation that we’ll find hidden damage once the old layers come off. That’s not pessimism. It’s preparation, and it’s why our quotes get approved more often than reopened.
Greg Holloway leads the Tilehurst team with the same standard the Kingswell family of companies has used since 2000: say the price before the work, arrive in the window we gave, leave the job site cleaner than we found it, and put every guarantee in writing. In Tiburon, that means our technicians carry stainless and non-ferrous fasteners on the truck because we know what the marine layer does to standard hardware. We don’t wait for a rusted drip edge to fail twice.
Metal Roof Installation in Tiburon
Metal roof installation in Tiburon is the strongest answer to the peninsula’s salt-heavy air, and it’s a job we take seriously from the first inspection to the final fastener. A standing seam or metal tile system sheds fog moisture fast, resists the corrosion cycle that shortens asphalt and wood systems here, and meets the Class A fire assembly requirements that Marin County enforces across Tiburon’s WUI-designated hillsides. Most metal roof installations on Tiburon homes run $18-$32 per square foot installed, depending on panel profile, roof pitch, and the amount of old decking we have to replace.
Corrosion-Resistant Fastener Specification
The biggest mistake on Tiburon metal roofs isn’t the panel choice. It’s the screws and clips. We spec stainless and zinc-aluminum coated fasteners on every exposed fastener system, and we verify the flashing at every penetration before panels go down. On bay-facing slopes, we’ve seen standard galvanized fasteners start to bloom rust within five years.
Class A Assemblies for WUI Zones
If your Tiburon home sits in a Wildland-Urban Interface zone, metal is often the fastest path to a compliant Class A roof. We handle the full conversation with you: panel selection from Atlas, Tamko, or Boral profiles, underlayment choices that meet Marin code, and the written fire assembly documentation your insurer may ask for.
Residential Roofing in Tiburon
Residential roofing in Tiburon means working on homes that were built to frame the Bay, not to keep fog moisture out of every seam. Our residential roofing service covers full replacements, targeted repairs, re-decking, and the low-slope sections that show up on so many mid-century homes above Tiburon Boulevard. A full asphalt shingle replacement on a typical Tiburon home runs $14,000-$28,000, with low-slope membrane sections adding $1,800-$4,500 where the original design included flat view decks or carport roofs.
Low-Slope and Flat-Section Work
The flat and near-flat sections on Tiburon’s 1950s through 1970s homes trap water that the fog belt keeps damp for weeks. We inspect drainage paths, correct ponding before laying new membrane, and install ice and water shield at every transition where a flat section meets a pitched one. Skipping that step is how you get a new roof that leaks in the first winter.
View-Conscious Roofing Practices
Nobody buys a Tiburon home to stare at a roof. We stage materials tight, keep the job site orderly, and schedule work so the view corridor stays as clear as possible during the project. Our crews are background-checked and uniformed, so you always know who’s on your property and what they’re doing there.
Trusted Brands We Service in Tiburon
Tilehurst Roofing installs and services roofing systems from seven major manufacturers, so the product matches your home rather than whatever happens to be in a warehouse. For Tiburon homes specifically, we lean on GAF for its high-wind asphalt lines, Tamko for low-slope and modified bitumen products, and Atlas for metal and stone-coated steel profiles that perform well against salt air. We keep common flashing, sealant, and drain components in local stock for Tiburon jobs, which means fewer delays when a mid-century valley needs replacing mid-project.
Common Roofing Company Problems We See in Tiburon Homes
- Rusted-out flashing and drip edge on bay-facing slopes. The marine layer pushes salt-laden air across roofs from three compass directions at once, so the metal that protects your roof edges fails years before the shingles do. We inspect flashing before we ever quote shingle replacement.
- Ponding on low-slope mid-century sections. Homes built in the 1960s and 1970s often have flat or nearly flat sections designed for views, not drainage. Water sits, algae grows, and the underlayment rots under what looks like an intact surface.
- Cedar shake tear-offs that trigger Class A requirements. Many of Tiburon’s older hillside homes still carry the original or lightly repaired shake roofs. Marin County code and WUI fire designations mean a straight shake-for-shake replacement is off the table, and the compliance conversation has to happen before the tear-off starts.
- Hidden decking damage at valleys and penetrations. On Tiburon’s steep lots, water runs fast into concentrated valleys. When the old cap comes off, softened decking is the rule, not the exception. We write decking allowances into the contract so you know the hidden cost range before we open anything.
Pricing for Roofing Company in Tiburon, CA
Asphalt shingle roof repair in Tiburon typically runs $450-$1,200 for small leaks and flashing work. Full flat-section membrane replacement lands between $1,800 and $4,500. A complete asphalt replacement on a Tiburon home runs $14,000-$28,000, while standing seam metal systems run $18-$32 per square foot installed. What moves the number? Decking thickness, access for material staging on steep lots, low-slope transitions, and whether the old roof is shake that triggers Class A compliance work. Every Tilehurst quote includes a written allowance sheet for hidden repairs, so the number in your hands before work starts is a floor with a clearly stated ceiling. Call (945) 303-9821 for a free estimate in Tiburon.
On a 1968 low-slope mid-century home off Tiburon Boulevard, our crew opened a failing flat section and found the original fascia and drip edge rusted through, with softened decking at a valley that had been holding water under the old mineral cap. We replaced the corroded metal with stainless drip edge, added ice and water shield at the transition, and re-set the ridge vent before laying a new Class A assembly. The hidden framing repair was written as a signed change order before we pulled another nail. That’s how we work here.
For Tiburon’s hillside terrain, where the WUI fire designation has pushed the town off the wood-shake roofs that were once ubiquitous, a re-roof is often a full material-compliance conversation before a single nail comes out. Tiburon sits on a peninsula nearly surrounded by San Francisco Bay, exposing homes to salt-laden marine air from multiple compass points simultaneously. That creates a corrosion environment more aggressive than virtually anywhere else in Marin County. Metal flashing, fasteners, and roof penetrations on Tiburon’s hillside homes degrade measurably faster than in inland neighbors like Mill Valley or San Rafael, making flashing inspection and stainless or non-ferrous hardware specification the central roofing concern here.
That’s why almost every roofing scope in Tiburon starts with a flashing-first inspection rather than a shingle-first price. The marine layer rolls in off the water from multiple directions, keeping roofing materials wet for extended periods even in dry months. It accelerates moss and algae growth on north-facing slopes and promotes hidden moisture intrusion at seams and penetrations on the low-pitch mid-century sections common to the area. A roofer who doesn’t account for that will quote you a number that won’t survive the first day of tear-off.
We Also Serve Cities Near Tiburon
Our crews work throughout the Bay Area and beyond. If you’re outside Tiburon proper, we also handle roofing across Tiburon and the surrounding region, including San Francisco, San Jose, Los Angeles, and San Diego. The same written pricing and 365-Day Done Right Promise travels with every job, no matter the city.
Serving Tiburon, CA - Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Tiburon
Because Tiburon’s hillside homes hide decking damage, rusted flashing, and failed waterproofing that no one can see until the old layers come off. The fix is simple: work with a roofer who writes an allowance sheet into the contract before work starts. We inspect first, give you a written range for hidden repairs, and get a signed change order before touching anything unexpected. Call (945) 303-9821 and we’ll walk you through a typical Tiburon allowance sheet.
In most WUI-designated hillside zones, no. Marin County requires Class A fire assemblies, which standard cedar shakes don’t meet. We tear off failed shakes and replace them with Class A systems from Atlas or Boral that preserve the look you want without violating code. We’ll confirm your specific zoning before you spend a dollar.
It corrodes standard galvanized fasteners and flashing years faster than you’d see in Mill Valley or San Rafael. That’s why we spec stainless and non-ferrous hardware on Tiburon jobs, especially on bay-facing slopes and flat sections where salt fog lingers. It’s a small material upgrade that prevents large failures later.
Look for standing water after morning fog, rust streaks at the drip edge, and soft spots near the valleys where runoff concentrates. Then call us. We’ll inspect the drainage path, the flashing, and the decking at the problem areas, and we’ll give you a written price before any repair work starts. The free estimate is exactly that: free.
Yes. Every Tilehurst estimate includes a measured square count of your roof, a line-item material list, and a written price for labor. You’ll see exactly what you’re paying for before the crew arrives. If you’ve had a square count from another bidder that doesn’t match ours, call (945) 303-9821 and we’ll re-measure with you.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving the Tiburon area with the Kingswell Guarantee since 2000.