Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Parkway
If you own a home in Parkway, you need a roofer who knows that every permit here runs through Sacramento County, not a city office, and that a tear-off on a 1970s tract home is heavier work than the same job across the line in Elk Grove. We’re Tilehurst Roofing, a Kingswell family company founded in 2000, and our crews serve Parkway every week. When you call, a live person answers – not voicemail, not a callback queue – and you get a written price before any work starts. Call (945) 303-9821 for a free estimate.
Why Tilehurst Roofing Is Parkway’s Preferred Roofing Company Company
Parkway homeowners tend to ask the same first question: “Will you actually show up when you say you will?” We understand why. This is a community of single-story and split-level tract homes built mostly between the late 1970s and early 1990s, and plenty of owners here have been burned by no-shows or by crews that found “surprises” after the roof was open and the price went up. Our Roofing Company team works differently. The Kingswell Way is simple: say the price before the work, show up in the window we gave, put the guarantee in writing, and come back if the repair fails.
Our crews regularly work off Bruceville Road, along Whitelock Parkway, and through the older tracts south of Calvine Road, so we know the housing stock here. We know which homes have original 3-tab shingles that are long past their rated life. We know which have had a second layover added sometime in the 1990s or 2000s. And we know that Sacramento County DCD rules apply to every single one of them. Our 365-Day Done Right Promise covers every job for a full year, and every repair carries a written guarantee delivered before the crew leaves, not mailed later.
Free Roof Estimate in Parkway
A Free Roof Estimate for a Parkway home starts with a full inspection of what’s actually on your roof and what’s under it. We look at shingle condition, granule loss, the drip edge, the underlayment, the flashing around vents and skylights, and the decking below. On most 1970s-to-1990s tract roofs in Parkway, the decking has never been replaced, and we check for soft spots at the valleys and where penetrations were sealed decades ago. The estimate is written, line-itemed, and in your hands before you commit to anything – and it includes an allowance for the repairs we can reasonably predict on this stock of home.
What the inspection covers
We walk the roof, check the ridge cap and drip edge, inspect the flashing at every penetration, and look at the attic side for signs of water staining or framing movement. In Parkway’s summer heat, thermal cycling stresses the shingles fast, and by fall, we often find granule loss that tells us the roof is in its last year or two. We explain what we find in plain language, so you know exactly what’s failing and what’s still serviceable.
When to schedule in Parkway
The Sacramento Valley’s summer heat pushes rooftop temperatures well past 105°F, which accelerates asphalt shingle blistering. By mid-September, the damage is visible and the rainy season is close behind. The fall inspection window is the smartest time to catch problems in Parkway, before the first wet weeks expose every weak seam. We’ll schedule your free estimate around that window – call (945) 303-9821.
Roofing Contractor in Parkway
A Roofing Contractor in Parkway has to handle county permitting, older decking, and multi-layer tear-offs, because this unincorporated CDP doesn’t have its own building department. Every permit and every inspection routes through Sacramento County DCD, and the county’s code requires a full tear-off when a roof already carries two or more shingle layers. That’s the single biggest difference between a Parkway job and a comparable job in incorporated Elk Grove or Sacramento proper. We write the county permitting and inspection sequence into your contract from day one, so there’s no stop-work surprise mid-job.
Field conditions on Parkway tract homes
Most of our Parkway jobs start as a straightforward replacement estimate and turn up one of two conditions: the existing roof is a second or third layover that county code won’t let us cover again, or the original decking underneath has started to rot at the valleys. We open the roof before we finalize the number, not after. The written allowance in our estimate covers decking, fascia, and waterproofing repairs, and if we find something the allowance doesn’t cover, you approve the price in writing before we touch it.
Counties and code timing
Unincorporated Parkway falls under Sacramento County DCD’s fee schedule and inspection timeline, which runs different from city-run programs. We file the permit, schedule the inspection, and manage the sequence. Greg Holloway, who leads our Parkway work, has walked enough of these county inspections to know what the DCD inspector checks first: nailing pattern, drip edge, valley shielding, and the ventilation intake and exhaust.
Trusted Brands We Service in Parkway
We stock and install materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, because a Parkway tract home on a 3:12 pitch needs a different shingle than a coastal house in a high-wind zone. We’re not pushing one house brand out of the truck. On our late-1970s Parkway Estates tear-off off Franklin Boulevard, we finished with CertainTeed architectural shingles, and we keep Atlas and Tamko lines stocked for the steeper split-levels where homeowners want a heavier laminated shingle. Call (945) 303-9821 and tell us what you want – we’ll price it in writing.
Common Roofing Company Problems We See in Parkway Homes
- Multi-layer shingle layovers. Many Parkway homes built in the late 1970s through early 1990s have had a second layer of shingles nailed over the original 3-tab. Sacramento County code requires a full tear-off at that point, which adds labor and disposal weight to the job.
- Rotted valley decking. The original plywood decking on older tract homes tends to soften at the valleys first, where water sits longest. We replace it to the sheathing and lay ice and water shield before the new shingles go down.
- Unpermitted prior work. A surprising number of Parkway roofs have had unpermitted patches or partial replacements over the years. When the county DCD inspector sees it, the correction has to happen before the final sign-off.
- Failed drip edge and fascia connection. On some 1970s split-levels, we find drip edge nailed straight through the fascia rather than under the starter course. That’s a slow leak waiting to happen, and we fix the connection before it becomes a decking failure.
Pricing for Roofing Company in Parkway, CA
Here are real numbers for Parkway, based on the homes we regularly serve. Asphalt shingle repairs run $450-$1,200 depending on the scope and access. A full tear-off and re-roof on a 1,800-2,400 square foot single-story tract home runs $12,500-$19,500, and that includes the county permit, DCD inspection coordination, decking allowance, tear-off, disposal, and underlayment. Flat roof membrane replacement on a small addition or carport runs $3,800-$7,500. Metal roofing runs $18,000-$32,000 on the same footprint, and tile replacement runs $16,000-$28,000. The two biggest cost drivers in Parkway are the county-required full tear-off when multiple layers exist, and the condition of the original decking once we open the roof. Call (945) 303-9821 for a written, line-item estimate – it’s free, and it covers everything above.
We Also Serve Cities Near Parkway
Tilehurst Roofing serves Roofing Company in Parkway and the surrounding region, including Los Angeles, San Diego, San Jose, and San Francisco. If you own a home nearby and need a written estimate, call (945) 303-9821 and our scheduling team will get you on the calendar.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Parkway
Parkway is an unincorporated census-designated place, so building permits and inspections are handled by Sacramento County DCD, not a municipal building office. The county’s code timelines and fee schedule differ from incorporated cities, and we manage the paperwork and the inspection sequence from start to finish. Call (945) 303-9821 for an exact quote on your specific project – the estimate is free and written.
No. Sacramento County code requires a full tear-off when a roof already carries two or more layers, and a third layover almost always triggers a stop-work if it’s discovered mid-job. We check the layer count before we finalize your estimate, and the tear-off, disposal, and new underlayment are all priced in writing up front.
We look at the decking, the drip edge, the underlayment, and the flashing. On a late-1970s split-level in the Parkway Estates tract off Franklin Boulevard, our crew found two prior shingle layovers and the original decking soft at the valleys. We tore off to the sheathing, replaced the rotten decking and fascia, laid ice and water shield at the valleys and penetrations, and set new drip edge. The county DCD inspection passed on the first walk, but only after that unpermitted third layer was removed.
We write a decking and repair allowance into every Parkway estimate, so the pricing structure is in place before we open the roof. If we find something outside that allowance – rotted decking, failed framing, unpermitted prior work – you approve the correction in writing before we proceed. No surprise change orders, and no work you didn’t sign for.
Fall is the most critical window in Parkway. The Sacramento Valley’s summer heat has already done its damage by September, and the wet winters expose every thermal-cycling weakness. A fall inspection catches those problems before the first storm. Call (945) 303-9821 to schedule yours – free, and a written estimate comes with it.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Parkway CA.






Before
After
Before
After
Before
After