Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Parkway
Roof repair in Parkway usually runs between $350 and $1,200 for typical shingle and flashing work, with full leak repairs on older tract homes occasionally reaching $2,500 when decking replacement is required. Most Parkway jobs are completed in a single day once materials are on site. We know this unincorporated pocket of Sacramento County well, and we answer the phone at (945) 303-9821 when you call.
Parkway is not Elk Grove, and it’s not Sacramento proper. It’s a cluster of 1970s to 1990s tract homes where the roofing problems are predictable: worn 3-tab shingles, failed flashing at valleys, and decking that’s been quietly rotting under multiple layovers for years. When you call about a leak, we send someone who already understands what they’ll find before they set the ladder against the gutter.
Why Tilehurst Roofing Is Parkway’s Preferred Roof Repair Company
Tilehurst Roofing is part of the Kingswell family of roofing companies, founded in 2000. Greg Holloway leads our team, and he’s built the entire operation around a simple idea: write the price down before the work starts, and stand behind the repair in writing when the crew leaves. Homeowners in Parkway who’ve been burned by no-show contractors or prices that changed at the door tend to appreciate that approach.
Scheduling and dispatch for our Parkway crews coordinate from the brand’s Sacramento office, but the technicians who show up at your door work out of the local area and know the streets here. The Windbridge Drive corridor, the split-levels near Florin Road, the single-story ranchers south of Meadowview. We’re not driving blind. When we quote a repair over the phone, we’re quoting with an understanding of the housing stock, the roof pitches, and the way Sacramento County’s Department of Community Development handles permits in unincorporated areas.
Every repair includes the Kingswell Way: a written price before any work starts, a crew that arrives in the window we gave, a work site left cleaner than we found it, and a written guarantee delivered before we pack up. If a repair fails inside the guarantee period under our 365-Day Done Right Promise, we return and correct it at no charge. That’s not a premium add-on. It’s the floor.
Storm Damage Roof Repair in Parkway
Storm damage roof repair in Parkway usually means one of two things: wind-driven rain that found its way through cracked shingles or failed flashing, or the slow damage that Sacramento Valley heat did to your roof before winter rain exposed it. Most Parkway storm repairs run $450 to $1,400 depending on how many shingles are involved and whether the underlayment held. We assess the full slope, not just the visible damage, because water moves laterally once it gets under the shingle layer.
What a Parkway Storm Inspection Covers
We check the ridge line, valleys, and every penetration: vent pipes, attic fans, skylights, and the sidewall flashing where a second-story wall meets a lower roof. On Parkway’s 3:12 to 4:12 pitches, water doesn’t run off as fast as on a steeper roof, so any small gap at a nail hole or shingle butt becomes a slow leak that soaks the underlayment for weeks before you see the stain on the ceiling.
What Wind and Rain Leave Behind
Summer heat on Parkway rooftops routinely pushes past 105°F, which blisters asphalt shingles and strips granules. Then the first real winter storm drives rain into those weakened spots. By the time a homeowner notices water in the garage or a stain in the corner of the living room, the decking underneath is often already soft. We price the repair honestly: if the decking needs replacement, you’ll see that as a line item on a written change order before we cut it out.
Metal Roof Repair in Parkway
Metal roof repair in Parkway is less common than shingle work, simply because most of the tract homes here were built with asphalt, but we see standing seam and corrugated metal panels on additions, patio covers, and the occasional full metal re-roof. Typical metal repairs in Parkway run $500 to $1,800, with the higher end reserved for panel replacement or resealing an entire valley. Most leaks on metal roofs are not the metal itself; they’re the screws, the washers, and the sealant around penetrations.
Fasteners and Flashing on Metal Roofs
The neoprene washers on exposed fastener panels fail in direct sun. After 10 to 15 years of Parkway summers, they crack, the screw backs out slightly, and the hole becomes a water inlet. Replacing fasteners alone often stops a leak that looks like it needs a full roof. We check the panel laps too: if the sealant at a lap has gone brittle, water wicks sideways under the metal and shows up far from the actual entry point.
When Patch Work Becomes Panel Work
If a tree limb punctured a panel or a previous repair used the wrong gauge metal against an existing panel, patching is temporary. In Parkway, where mature trees overhang many of the older lots, limb damage after a storm is common. We’ll tell you if a patch will hold or if you need panel replacement, and the written quote says exactly which one we’re doing before any material hits your roof.
Trusted Brands We Service in Parkway
We work with material from seven leading manufacturers so the product matches the Parkway home, not just what happens to be on the truck. GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Parkway’s older tract stock, we often recommend Atlas and Tamko shingles for their heat resistance in the Sacramento Valley sun, while Boral’s tile and synthetic options make sense on higher-end replacements where the homeowner wants something heavier than asphalt. Parts for common Parkway repairs ship from local suppliers, which means most jobs don’t wait on a freight order. If you need a specific shingle color to match an existing roof, we can usually have it staged within a few days.
Common Roof Repair Problems We See in Parkway Homes
- Multiple unpermitted shingle layovers. Many Parkway homes built in the 1980s have two or even three layers of shingles stacked on the original deck. When Sacramento County DCD gets involved, that layover is frequently flagged as a code violation and a full tear-off becomes mandatory. You can’t legally fix the leak without addressing the entire assembly.
- Failed flashing at valleys and sidewalls. On split-level Parkway homes, the valley where a lower roof meets an upper wall is a chronic leak point. The original galvanized flashing from the 1980s is now rusted through, and the sealant around it has turned to powder. We replace it with modern material and a proper weep design.
- Brittle vent boots and cracked pipe collars. The sun bakes the rubber boot around plumbing vent pipes until it splits. It’s a $150 to $400 repair that homeowners often delay, but it’s usually the first thing we find when a Parkway homeowner says the leak is “near the bathroom.”
- Soft decking at the eaves. Parkway’s low-pitch roofs hold water longer at the drip edge. Once the underlayment is compromised at the eave, water sits against the plywood and rots it. A repair that starts as a few shingles often becomes a decking patch, and we price that honestly in the initial quote when we can see it coming.
Pricing for Roof Repair in Parkway, CA
Here’s what you can expect in Parkway based on the work we actually do here. Minor shingle replacement runs $350 to $650. A typical leak repair with flashing replacement runs $600 to $1,200. Valley rebuilds with new decking run $900 to $1,800. If Sacramento County requires a full tear-off because of unpermitted layovers, that’s a bigger job, and we’ll price it separately with a written line-item quote. What moves the number is decking condition, the number of layovers, and what the county inspector requires once the permit is pulled. We don’t keep that a mystery. We put the price in your hands before any work starts, and if conditions change once the roof is open, we bring you a written change order for approval before we proceed. Call (945) 303-9821 for a free estimate, and you’ll know the number before we touch the ladder.
We Also Serve Cities Near Parkway
If you’re outside Parkway, our Roof Repair team also covers the surrounding region. We work in Los Angeles, San Diego, San Jose, and San Francisco, with the same written guarantees and the same Kingswell Way on every job. If you’re in one of those areas, Roof Repair in Parkway is just a call away at (945) 303-9821, and we’ll route you to the right crew.
Serving Parkway, CA - Our Local Coverage Area
We’re based in the Parkway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Parkway
Because many Parkway homes from the 1970s through 1990s have multiple unpermitted shingle layovers, and Sacramento County code requires a full tear-off once a roof reaches three layers or once the decking is compromised. When we open the roof for a repair and the county DCD sees the layover, they’ll flag it as a stop-work condition until the entire assembly is torn down to the sheathing. We handle the permit, the tear-off, and the documentation, so you’re not left figuring out county requirements alone.
Yes. Parkway is unincorporated Sacramento County, so roofing permits and inspections run through the county Department of Community Development, not a municipal building office. That affects timelines, fees, and what the inspector will require. We coordinate directly with the DCD, and if unpermitted prior work surfaces during the repair, we document it and bring you a written plan rather than letting the job stall.
Outdated or missing underlayment, soft decking at valleys and eaves, brittle flashing, and often a second or third layer of shingles that shouldn’t be there. On a split-level built in 1983 off Windbridge Drive, our tech went up for what the homeowner called a small leak over the garage. We found three layers of dead 3-tab shingles, soft decking at the valley, and brittle flashing at the sidewall penetration. Because the previous owner’s layover had never been permitted, the county flagged it mid-job. We pulled the correct permit, tore off to the sheathing, replaced the decking and drip edge, laid ice and water shield in the valleys, and reset the ridge vent before the next rain. Every extra item was priced and approved in writing before we touched it.
Fall is the smartest window for Parkway homeowners. The summer heat, routinely 105°F and hotter on the roof surface, bakes the damage in. The winter rains expose it. If you schedule an inspection in September or October, you catch granule loss and cracked flashing before the first big storm, and you avoid paying for water damage on top of the roof work. Call (945) 303-9821 and we’ll schedule you before the wet season.
We repair both. Metal roofs on Parkway additions and patio covers typically fail at fasteners, washers, and flashing rather than the panels themselves. We replace what’s failed and match the existing panel where possible. If a section is too far gone, we’ll quote a panel replacement as a separate line item and you’ll approve it before we order the metal.
Written by Greg Holloway, Owner at Tilehurst Roofing, serving Parkway and surrounding Sacramento County communities.






Before
After
Before
After
Before
After